journal article·2024-01Open access

Effect of relaxation before quenching on microstructure and properties of the steel

Jiaxin Shi, Wei Yu, Xiong Yang, Yide Wang, Baozhong Zhang

Materials Science and Technology· Volume 40· Issue 1

Abstract

The effect of different relaxation time before online quenching on mechanical strength and toughness of high-strength medium-thickness martensitic steel plate was analysed in this work. Increasing the relaxation time from 15 s to 135 s resulted in an increase in the impact energy at −20 °C from 33 J to 148 J. However, the yield strength was decreased from 1050 MPa to 1002 MPa. Dislocation density and martensitic lath width are the main factors causing the strength change. Moreover, the dislocation density caused by deformation drops first sharply and then gently during the relaxation, resulting in an inverse trend of martensitic lath width. Additionally, there appears to be a linear relation between impact energy at −20 °C and dislocation density −1/2 .
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Engineering Technology, University of Science and Technology Beijing, Beijing, China

Ningbo Iron and Steel Company Limited, Zhejiang, China

References (35)

Show source-provided references
1. 10.1016/j.msea.2019.13827210.1016/j.msea.2019.138272 ↗
2. 10.1016/j.mspro.2014.06.11810.1016/j.mspro.2014.06.118 ↗
3. 10.1016/j.actamat.2018.07.06010.1016/j.actamat.2018.07.060 ↗
4. Song X · Trans Mater Heat Treat · 2014 · 35 · 147
5. Zhang Q · Metal Mater Metall Eng · 2016 · 44 · 15
6. 10.1016/S1006-706X(10)60061-110.1016/S1006-706X(10)60061-1 ↗
7. 10.1515/secm-2020-004510.1515/secm-2020-0045 ↗
8. Yang SW · J Univ Sci Technol Beijing · 2001 · 1 · 119
9. Yuan S · Acta Metall Sin · 2004 · 8 · 887
10. Wu HB · Acta Metall Sin · 2005 · 04 · 385
11. 10.1016/j.msea.2018.04.08610.1016/j.msea.2018.04.086 ↗
12. Adamczyk J · J Achiev Mater Manuf Eng · 2005 · 14 · 299
13. Yang X · Hot Work Technol · 2019 · 48 · 125
14. 10.1016/j.msea.2014.08.07210.1016/j.msea.2014.08.072 ↗
15. 10.1016/j.msea.2021.14197710.1016/j.msea.2021.141977 ↗
16. 10.1016/j.msea.2020.14024910.1016/j.msea.2020.140249 ↗
17. 10.1016/j.jallcom.2012.11.10810.1016/j.jallcom.2012.11.108 ↗
18. 10.1016/j.matchar.2021.11158910.1016/j.matchar.2021.111589 ↗
19. 10.1016/j.msea.2021.14193910.1016/j.msea.2021.141939 ↗
20. 10.1016/j.msea.2013.09.08610.1016/j.msea.2013.09.086 ↗
21. 10.1016/j.msea.2018.06.07310.1016/j.msea.2018.06.073 ↗
22. Di G · Cailiao Rechuli Xuebao · 2011 · 32 · 56
23. 10.1016/j.matchar.2018.05.03410.1016/j.matchar.2018.05.034 ↗
24. Wei Y · J Beijing Univ Technol · 2011 · 37 · 1880
25. 10.1016/j.msea.2011.11.07810.1016/j.msea.2011.11.078 ↗
26. 10.1016/j.jallcom.2022.16468510.1016/j.jallcom.2022.164685 ↗
27. Yuan C · Neimenggu Keji Daxue Xuebao · 2011 · 30 · 13
28. Kassner ME · Acta Mater · 2003 · 52
29. 10.1016/j.actamat.2014.01.03910.1016/j.actamat.2014.01.039 ↗
30. Akinobu S · Mater Sci Eng A · 2010 · 527 · 753810.1016/j.msea.2010.08.026 ↗
31. 10.3724/SP.J.1037.2011.0069810.3724/SP.J.1037.2011.00698 ↗
32. 10.1016/S1006-706X(12)60088-010.1016/S1006-706X(12)60088-0 ↗
33. 10.1016/j.scriptamat.2007.10.05310.1016/j.scriptamat.2007.10.053 ↗
34. Luo Z · Cailiao Rechuli Xuebao · 2010 · 31 · 63
35. Cottrell AH · Trans Metall Soc AIME · 1958 · 212 · 192