journal article·2024-02Open access

Role of δ-phase on recrystallisation behaviour of Inconel 718

Basavaraj Padasale, Lokendra Potphode, Preetish C. D’silva, Subray R. Hegde

Materials Science and Technology· Volume 40· Issue 2

Abstract

The present work investigates the annealing behaviour of prior-coldworked Inconel 718 (IN718) sheets over wide reduction and temperature ranges by performing cold-rolling and isothermal annealing, followed by mechanical testing and structural characterisation. The study reveals that, with increasing annealing temperature, the prior-coldworked alloy shows non-monotonic M-Type variation with double peak-hardening at 0.3 T m and 0.6 T m . The study discovers that the first peak is due to the ‘static–strain–aging phenomenon’ that precedes recovery-softening. The second peak-hardening is due to precipitation-hardening, following which, the alloy softens due to recrystallisation. Supported by SEM, electron back-scattered diffraction and X-Ray diffraction results, the investigation suggests that the precipitation of fine rod-shaped δ-phase creates numerous nucleation sites at the shear bands that cause recrystallisation-burst at 0.75 T m . However, above 0.75 T m absence of the δ-phase activates grain-boundary migration resulting in rapid grain-coarsening.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Metallurgical and Materials Engineering, National Institute of Technology Karnataka, Mangaluru, India

References (38)

Show source-provided references
1. 10.31399/asm.tb.stg2.978162708267910.31399/asm.tb.stg2.9781627082679 ↗
2. 10.2320/matertrans.45.272810.2320/matertrans.45.2728 ↗
3. 10.1016/j.msea.2020.13986010.1016/j.msea.2020.139860 ↗
4. 10.1016/j.actamat.2019.05.06110.1016/j.actamat.2019.05.061 ↗
5. 10.7449/1991/Superalloys_1991_325_33510.7449/1991/Superalloys_1991_325_335 ↗
6. Radavich JF. The physical metallurgy of cast and wrought alloy 718. Superalloy 1989; 718: 229–240.10.7449/1989/Superalloys_1989_229_240 ↗
7. 10.1016/j.msea.2020.13986010.1016/j.msea.2020.139860 ↗
8. 10.1007/s11595-014-0925-410.1007/s11595-014-0925-4 ↗
9. 10.1007/s11661-015-3035-910.1007/s11661-015-3035-9 ↗
10. Andrews KW · J Iron Steel Inst · 1965 · 203 · 721
11. Ilepori D. Physical metallurgy of alloy 718. Columbus, OH: Defence Metal Information Centre, 1965.
12. Warren R. Precipitation in spray-formed IN 718. Superalloys 2001; 718: 617–626.10.7449/2001/Superalloys_2001_617_626 ↗
13. Brooks JW, Bridges PJ. Metallurgical stability of inconel 718. Champion, PA: International Symposium on Superalloys , 1988, pp. 33–42.10.7449/1988/Superalloys_1988_33_42 ↗
14. Range M, Temperature C. Inconel alloy 718.
15. Singh RP, Hyzak JM, Howson TE, et al. Recrystallization behavior of cold rolled alloy 718. Superalloys 1991; 718: 205–215.10.7449/1991/Superalloys_1991_205_215 ↗
16. 10.2172/401608710.2172/4016087 ↗
17. Ahmad S · Ournal of Modern Science and Technology · 2013 · 1 · 1
18. Cieslak MJ. The solidification behavior of an alloy 625/718 variant. Superalloys 2012; 718: 71–80.10.7449/1991/Superalloys_1991_71_80 ↗
19. 10.1016/j.proeng.2017.10.113710.1016/j.proeng.2017.10.1137 ↗
20. 10.1007/s12613-016-1326-910.1007/s12613-016-1326-9 ↗
21. 10.1016/j.jmatprotec.2022.11769610.1016/j.jmatprotec.2022.117696 ↗
22. 10.1016/j.jmrt.2021.08.13410.1016/j.jmrt.2021.08.134 ↗
23. 10.1051/matecconf/2014140700410.1051/matecconf/20141407004 ↗
24. 10.4028/www.scientific.net/AMR.409.75110.4028/www.scientific.net/AMR.409.751 ↗
25. 10.1016/j.msea.2021.14171310.1016/j.msea.2021.141713 ↗
26. 10.17222/mit.2014.16310.17222/mit.2014.163 ↗
27. 10.1007/978-94-009-5085-6_2110.1007/978-94-009-5085-6_21 ↗
28. 10.1007/s11661-006-0149-010.1007/s11661-006-0149-0 ↗
29. 10.1016/j.matchemphys.2019.12202110.1016/j.matchemphys.2019.122021 ↗
30. 10.1080/1478643560823807410.1080/14786435608238074 ↗
31. 10.1016/j.actamat.2017.03.00410.1016/j.actamat.2017.03.004 ↗
32. 10.1111/j.0022-2720.2004.01296.x10.1111/j.0022-2720.2004.01296.x ↗
33. 10.1016/B0-08-043152-6/01832-510.1016/B0-08-043152-6/01832-5 ↗
34. 10.1016/0001-6160(69)90084-410.1016/0001-6160(69)90084-4 ↗
35. 10.1557/JMR.1997.030610.1557/JMR.1997.0306 ↗
36. 10.1007/978-3-319-19443-1_2410.1007/978-3-319-19443-1_24 ↗
37. Nalawade S, Mahadevan S, Singh JB, et al. Serrated yielding in alloy 718. In: 7th international symposium on superalloy 718 and derivatives (TMS), Notre Dame, IN. 2010; Vol. 2, pp. 809–823.10.7449/2010/Superalloys_2010_809_823 ↗
38. 10.1557/PROC-460-49910.1557/PROC-460-499 ↗