journal article·2023-12

The densification, microstructure, and mechanical properties of (TiB 2 +SiC)/AlSi10Mg composites manufactured by LPBF

Bo Dang, Zhao Zhang, Kan Li, Yan Chen, Junfeng Xu, Zengyun Jian

Materials Science and Technology· Volume 39· Issue 18
Publisher page

Abstract

Herein, the (TiB 2 + SiC)/AlSi10Mg composites were prepared using a planetary ball mill and fabricated by the LPBF technique. The effects of nano-TiB 2 particles and laser power on the densification, microstructure, and mechanical properties of the LPBFed (TiB 2 + SiC)/AlSi10Mg composites were investigated. The densification and mechanical properties of composites increase first and then decrease with increasing laser power and nano-TiB 2 particle content. Under the optimal processing parameters and nano-TiB 2 particle content, 98.3% relative densification of the LPBFed composites was achieved. The LPBFed (TiB 2 + SiC)/AlSi10Mg composites had superior mechanical properties, including a tensile strength of 452.8 MPa, a yield strength of 217.2 MPa, and an elongation of 4.33% (increases of 30.8%, 14.3%, and 90.7%, respectively), and the maximum microhardness of 126.7 HV (increase of 6.1%).
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Aluminum Alloys Composites Properties · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

The Shaanxi Key Laboratory of Photoelectric Functional Materials and Devices, Xi'an Technological University, Xi'an, P.R. People's Republic of China

Funding

Natural Science Foundation of China

References (25)

Show source-provided references
1. 10.1016/j.pmatsci.2015.03.00210.1016/j.pmatsci.2015.03.002 ↗
2. 10.1016/j.pmatsci.2019.04.00610.1016/j.pmatsci.2019.04.006 ↗
3. 10.1016/j.jmrt.2020.04.05910.1016/j.jmrt.2020.04.059 ↗
4. 10.1016/j.matlet.2021.13125410.1016/j.matlet.2021.131254 ↗
5. 10.1016/j.jmrt.2021.11.15010.1016/j.jmrt.2021.11.150 ↗
6. 10.1016/j.jmst.2020.04.06610.1016/j.jmst.2020.04.066 ↗
7. 10.1016/S1003-6326(20)65357-210.1016/S1003-6326(20)65357-2 ↗
8. 10.1016/j.jmrt.2022.01.12910.1016/j.jmrt.2022.01.129 ↗
9. 10.1016/j.msea.2022.14416310.1016/j.msea.2022.144163 ↗
10. 10.1016/j.msea.2020.14010910.1016/j.msea.2020.140109 ↗
11. 10.1016/j.scriptamat.2022.11495410.1016/j.scriptamat.2022.114954 ↗
12. 10.1016/j.msea.2022.14310710.1016/j.msea.2022.143107 ↗
13. 10.1016/j.addma.2020.10160510.1016/j.addma.2020.101605 ↗
14. 10.1016/j.msea.2019.04.02810.1016/j.msea.2019.04.028 ↗
15. 10.1016/j.addma.2020.10137810.1016/j.addma.2020.101378 ↗
16. 10.1016/j.vacuum.2021.11036510.1016/j.vacuum.2021.110365 ↗
17. 10.1016/j.jmatprotec.2021.11738610.1016/j.jmatprotec.2021.117386 ↗
18. 10.1016/j.surfcoat.2018.05.07210.1016/j.surfcoat.2018.05.072 ↗
19. 10.1016/j.jallcom.2020.15728710.1016/j.jallcom.2020.157287 ↗
20. 10.1016/j.jmapro.2020.08.07310.1016/j.jmapro.2020.08.073 ↗
21. 10.1016/j.jallcom.2022.16517210.1016/j.jallcom.2022.165172 ↗
22. 10.1016/j.jmst.2021.08.03010.1016/j.jmst.2021.08.030 ↗
23. 10.1016/j.ceramint.2021.07.26310.1016/j.ceramint.2021.07.263 ↗
24. 10.1016/j.jallcom.2020.15755310.1016/j.jallcom.2020.157553 ↗
25. 10.1016/j.apsusc.2010.02.03010.1016/j.apsusc.2010.02.030 ↗