journal article·1990-04-01

Tensile properties of heat affected zone of medium strength low carbon, C–Mn, and 2·25Cr–1Mo steels

O. M. Akselsen, G. Rørvik

Publisher page

Abstract

The grain coarsened tensile properties in the heat affected zone (HAZ) of medium strength (Rp0·2⋍330–470 MN m−2) low carbon microalloyed, C–Mn, and 2·25Cr–1Mo steels have been examined using the weld simulation technique. Very high values of yield and tensile strength (Rp0·2>900 MN m−2; Rm>1100 MN m−2) can be obtained for low heat input welding (E < 1 MJ m−1; ∆t8/5< 5 s). For high heat input welding (E > 2 MJ m−1; ∆t8/5> 10 s), however, a substantial reduction in the values of Rp0·2 and Rm occurs, with the exception of the 2·25Cr–IMo steel. Based on the empirical equations developed, and the Suzuki BL70 hardness formula, it is shown that the grain coarsened HAZ yield and tensile strength can be calculated to an accuracy of ±50 MN m−2, while elongation at fracture and reduction in area can be predicted to an accuracy of ±3% and ±7%, respectively.MST/I077
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (6)

Show source-provided references
1. 1989 · 68 · 356
2. 1988 · 17 · 194
3. 10.1007/BF0265008910.1007/BF02650089 ↗
5. 10.1007/BF0266728310.1007/BF02667283 ↗
6. 1973 · 4 · 2203