journal article·1993-04-01

Potentiostatic etching of duplex stainless steels and high chromium white cast irons

J. H. Potgieter, P. de Visser

Publisher page

Abstract

The reasons for potentiostatic etching and the way in which it is carried out are explained. The technique was applied to some commercially important materials, and the information obtained is described. It was found that the chromium content of duplex stainless steels had a significant effect on the etching potential, but did not greatly influence the etching time. In high chromium white cast irons (HCWCIs), the composition of the various alloys influenced the etching potential very little, and it was possible to deduce a generally suitable etching range of 950–1050 mV (SCE) for the whole group. Manganous sulphate proved to be a superior etching agent, and very fine detail, e.g. different types of carbide, could be detected in HCWCIs after potentiostatic etching in this solution. Quantitative phase determinations were also possible for all materials investigated, provided that suitable etchants were used. Optimum etching times were from 10 to 15 s, regardless of the group of materials investigated.MST/1665
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (6)

Show source-provided references
1. 10.1016/1044-5803(90)90044-K10.1016/1044-5803(90)90044-K ↗
2. 10.1016/1044-5803(91)90050-E10.1016/1044-5803(91)90050-E ↗
3. 10.1016/0026-0800(85)90043-610.1016/0026-0800(85)90043-6 ↗
4. 1969 · 6 · 346
5. 1981 · 9 · 65
6. 10.1016/0043-1648(83)90272-710.1016/0043-1648(83)90272-7 ↗