journal article·1995-10-01

Effect of modified austemper on tensile properties of 0·52%C steel

Y. Tomita

Materials Science and Technology· Volume 11· Issue 10
Publisher page

Abstract

The effect of a modified austemper on the tensile properties of 0·52%C steel has been studiedfor the purpose of developing the mechanical properties of upper bainitic steel. The modified austempering treatment involved intercritical annealing at 1018 K in the two phase region offerrite (α) and austenite (γ) followed by austempering at 673 K and subsequent water cooling. The results have been compared with those obtained from conventionally austempered steel, and quenched and tempered steel with a similar ultimate tensile stress. The modified austempered steel consisted of a mixed structure of upper bainite and 10 vol.-% ferrite in which ferrite appeared as layers along the rolling direction. The modified austempering treatment wasfound to significantly increase the product of ultimate tensile stress and total elongation, and also the notch tensile stress at 193 K. Conventional austenitising at 1173 K followed by subcritical annealing at 998 K in the two phase region of ex and y, and then austempering at 673 K and subsequent water cooling produced the same mixed structure of upper bainite and 10 vol.-% ferrite. However, this treatment yielded inferior mechanical properties to those obtained with the modified austempering treatment, independent of the test temperature. The results are described and discussed.MST/3102
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Metal Forming Simulation Techniques · Laser and Thermal Forming Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.