journal article·1990-02-01

Precipitation–segregation mechanism for high temperature temper embrittlement of steels revealed by Auger electron spectroscopy and internal friction measurements

T. C. Lei, J. Sun, C.H. Tang, M. Lei

Publisher page

Abstract

A precipitation–segregation mechanism of high temperature (reversible) temper embrittlement has been suggested on the basis of Auger electron spectroscopy, internal friction measurements, and scanning and transmission electron microscopy (SEM, TEM) of 0·3C–Si–Mn–Cr steel after various heat treatments. It was found that P segregation takes place during heating for quenching and tempering. The intensity of P segregation does not change when the steel transforms from a ductile (600°C tempered for 2 h with water cooling) to a brittle (600°C tempered with furnace cooling) state. Isothermal aging at 500°C for 200 h leads to further segregation of P, but the intensity remains unchanged after a reductilising treatment (600°C reheating for 2 h with water cooling). (The term reductilising is used to describe the treatment employed to attempt to return the material to its original ductile state.) The internal friction measurements and TEM examinations indicated that the temper embrittlement of the steel is always accompanied by precipitation of very fine particles of Fe3C(N) causing dead pinning of dislocations within the grains while the reductilised state corresponds to the re-solution of these fine particles back into the a solid solution which explains the reversibility of the phenomenon. Therefore, the P segregation is a necessary factor for grain boundary fracture of the steel in the temper embrittled state, but is still not sufficient for the actual appearance of this mode of fracture. The leading factor is the precipitation of Fe3C(N) particles on dislocations and a precipitation–segregation mechanism is suggested which can be used to explain all the specific features of high temperature temper embrittlement.MST/707
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. 10.1007/BF0264850510.1007/BF02648505 ↗
2. 10.1007/BF0281482410.1007/BF02814824 ↗
3. 1983 · 17 · 24910.1179/030634583790420916 ↗
5. 1978 · 23 · 14910.1179/imtr.1978.23.1.149 ↗
6. 1953 · 173 · 240
7. 1917 · 11 · 307
8. 1980 · 1 · 277