Effects of hydrostatic pressure and non-uniform microstructure on superplastic forming and postformed tensile properties of AA 7475 aluminium alloy
Source abstract
Abstract
Superplastic forming of AA 7475 aluminium alloy sheets of grain size ~15 μm has been studied by imposing hydrostatic back pressures of between 0·1 and 2·86 MPa. Qualitative and quantitative studies of the effect of hydrostatic pressure on the cavitation of the alloy were carried out on formed domes. On the diametral section of a dome, cavities were mainly found in the centre of sheet thickness, where the grains were coarser than those near the surface. Dome height at failure was significantly increased by imposing hydrostatic back pressures during superplastic forming. For domes that were formed into top hat shapes, a maximum height/base radius ratio of 2:1 was obtained under a hydrostatic pressure of 2·86 MPa. Flat tensile testpieces were machined from top hats to evaluate the room temperature mechanical properties. It was found that the postformed ductility deteriorated with superplastic strain more rapidly than did the ultimate tensile strength. The effect of surface grooves, which were observed in formed domes and top hats, on postformed properties was also examined.MST/1576
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. 1984 · 393 · 11710.1098/rspa.1984.0049 ↗
2. 10.1016/0001-6160(82)90107-910.1016/0001-6160(82)90107-9 ↗
3. 10.1007/BF0265438510.1007/BF02654385 ↗
4. 10.1016/0001-6160(86)90182-310.1016/0001-6160(86)90182-3 ↗
5. 1988 · 23 · 31
6. 10.1007/BF0055607010.1007/BF00556070 ↗
7. 10.1115/1.322561910.1115/1.3225619 ↗
8. 10.1016/0001-6160(79)90051-810.1016/0001-6160(79)90051-8 ↗
9. 10.1016/0001-6160(81)90023-710.1016/0001-6160(81)90023-7 ↗
10. 10.1016/0036-9748(83)90066-210.1016/0036-9748(83)90066-2 ↗
11. 10.1016/0001-6160(82)90064-510.1016/0001-6160(82)90064-5 ↗
12. 10.1007/BF0266424410.1007/BF02664244 ↗
13. 10.1016/0001-6160(75)90047-410.1016/0001-6160(75)90047-4 ↗
14. 10.1016/0001-6160(78)90050-010.1016/0001-6160(78)90050-0 ↗
15. 1983 · 17 · 110.1179/030634583790427513 ↗
16. 1962 · 53 · 1671
17. 10.1007/BF0116075310.1007/BF01160753 ↗
18. 1981 · 2 · 109
19. 10.1016/0036-9748(77)90333-710.1016/0036-9748(77)90333-7 ↗
20. 1978 · 12 · 172
21. 1976 · 10 · 319
22. 10.1016/0001-6160(79)90173-110.1016/0001-6160(79)90173-1 ↗
23. 10.1016/0001-6160(80)90001-210.1016/0001-6160(80)90001-2 ↗
24. 1968 · 2 · 117
25. 10.1007/BF0265438610.1007/BF02654386 ↗