Microstructures of some high tensile brasses
Source abstract
Abstract
The microstructures of extruded high tensile brasses with compositions conforming to BS 2872/4 CZ114, CZ115, and CZ116 consist of copper rich fcc α-phase, ordered B2 β′-phase, and some iron rich particles; these particles are α-Fe in alloy CZ115 and Fe3Al in alloy CZ116. Alloy CZ114 contains mainly α-Fe particles, although a few, small precipitates of Fe3Al have also been observed. It is shown in studies of the microstructural development that the α-Fe particles are formed in the liquid, while Fe3Al is precipitated from solid solution over a wide temperature range. All the α-Fe and Fe3Al particles/precipitates have the same orientation relationship with the β′-matrix. Fine coherent precipitates of Fe3Al and α-Fe have been observed in quenched alloys. When the quenched alloys are tempered at temperatures between 400 and 500°C, the α-phase is precipitated from β′ and has a Widmanstätten morphology. The rates of coarsening of Fe3Al and α-Fe precipitates appeared to be appreciably higher in the disordered β than in the ordered β′-phase.MST/966
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Science · Bauxite Residue and Utilization · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (4)
Show source-provided references
1. 1982 · 27 · 7710.1179/imr.1982.27.1.77 ↗
2. 1975 · 103 · 20310.1111/j.1365-2818.1975.tb03895.x ↗
3. 10.1007/BF0264287010.1007/BF02642870 ↗
4. 10.1179/02670830122500077010.1179/026708301225000770 ↗