journal article·1995-02-01

Microstructure and mechanical properties of two ultrahigh boron steels

J. A. Jiménez, P. Acosta, G. Frommeyer, O. A. Ruano

Materials Science and Technology· Volume 11· Issue 2
Publisher page

Abstract

An investigation has been made of the tensile behaviour between 20 and 600°C of two ultrahigh boron steels (Fe–2·2B and Fe–4·9B), consolidated by hot isostatic pressing at temperatures ranging from 700 to 1100°C. Tensile tests showed plastic deformation only in the Fe–2·2B alloy. A decrease in yield and ultimate tensile stresses occurred when the consolidation temperature was increased. This was accompanied by an increase in the elongation to failure. This alloy satisfies the Hall–Petch relation for all testing temperatures. The slope of the yield stress versus d−1/2 curve (d is grain size) decreases as the temperature increases, indicating that the mechanism controlling plastic deformation becomes independent of grain size at high testing temperatures. The fracture mode observed was brittle at room temperature and ductile, shown by the presence of dimples, at temperatures above 400°C.MST/2050
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Fusion materials and technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. 1983 · 35 · 30
2. 1987 · 23 · 33
3. 10.1007/BF0264783410.1007/BF02647834 ↗
4. 1971 · 209 · 900
5. 1953 · 5 · 1463
6. 1972 · 210 · 351
7. 1957 · 186 · 54
8. 1954 · 176 · 187