Effect of tungsten additions on simulated heat affected zone toughness in 25%Cr base super duplex stainless steels
Source abstract
Abstract
The effect of partial replacement of molybdenum with tungsten in 25%Cr base super duplex stainless steels on simulated heat affected zone (HAZ) properties was investigated using (wt-%) Fe-25Cr-3Mc-7Ni-0.25N, Fe-25Cr-2Mo-7Ni-0.25N-2W, and Fe-25Cr-1.5Mo-7Ni-0.25N-3W alloys. Substitution of tungsten for molybdenum produced enhanced impact toughnessfor all selected cooling conditions as a result of increased austenite content, decreased intragranular precipitation, and smaller ferrite grain size. All simulated alloys exhibited a decrease in toughness after fast cooling owing to a higher amount of ferrite and intragranualr precipitation. Impact toughness also decreased at slow cooling because of the large ferrite grain size, despite a high austenite content. The peak impact toughness was observed at optimum cooling times of 33 and 171 s for all alloys. It is concluded that the addition of tungsten has a favourable effect on H AZ properties of 25%Cr base super duplex stainless steels.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (3)
Show source-provided references
1. 1992 · 8 · 89610.1179/026708392790169722 ↗
2. 1992 · 8 · 685
3. 1983 · 23 · 240