journal article·2021-04

Dynamic mechanical behaviour and microstructure of Al/Teflon reactive materials

Enling Tang, Ning Zhang, Qiang Wu, Lixiang Jiang, Chuang Chen, Yafei Han

Materials Science and Technology· Volume 37· Issue 6
Publisher page

Abstract

Dynamic compressive behavior of 2 kinds of Al/Teflon reactive materials samples are analyzed by using the Split Hopkinson pressure bar. The mass percentage of the samples is 26.5% Al and 73.5% Teflon. The particle size of Teflon is 30 µm, and the particle size of Al is 1.5 µm and 100 µm, respectively. The microstructure of the sample was studied by scanning electron microscope (SEM). The results show that Al/Teflon reactive materials undergoes compression-yield-unloading-enhancement stages during the process of dynamic compression. The dynamic compressive strength of Al/Teflon reactive materials samples prepared by Al 1.5 µm /Teflon 30 µm and Al 100 µm /Teflon 30 µm are 55 MPa and 47 MPa at the strain rate of 4 × 10 3 s −1 , respectively. When the Al particle diameter is 100 µm in Al/Teflon material, the strength contribution of Al is larger. However the defect is more obvious after yield, the strength is weaker than that of Al 1.5 µm /Teflon 30 µm sample.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Energetic Materials and Combustion · High-Velocity Impact and Material Behavior · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Key Laboratory of Transient Physical Mechanics and Energy Conversion Materials of Liaoning Province, Shenyang Ligong University, Shenyang, People's Republic of China

Science and Technology on Reliability and Environmental Engineering Laboratory, Beijing Institute of Spacecraft Environment Engineering, Beijing, People's Republic of China

Funding

National Natural Science Foundation of China

References (18)

Show source-provided references
1. Montgomery HE. Reactive fragment: US, US3961576 A. 1976.
2. Grudza ME, Jann D, Forsyth C Explosive launch studies for reactive material fragments. 4th joint Classified Bombs/Warheads and Ballistics Symposium. Newport, 2001: 110-118.
3. Zhang YM · 2008
4. Mock W, Drotar JT. Effect of aluminum particle size on the impact initiation of pressed PTFE/Al composite rods. Shock Compression of Condensed Matter: Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter, 2007.
5. He LR · Chin J Expl Propell · 2012 · 35 · 29
6. Mock W · Shock Compr Condens Matter · 2007 · 955 · 971
7. Xu SL · Chin J High Pressure Phys · 2009 · 23 · 384
8. Xu SL · Chinese J Theor Appl Mech · 2009 · 41 · 708
9. Xu SL · Expl Shock Waves · 2010 · 30 · 439
10. Zhao PD · Chin J Energ Mater · 2009 · 17 · 459
11. Yi HJ · Chin J Expl Propell · 2018 · 41 · 352
12. Huang JY · J Mater Eng · 2019 · 47 · 92
13. 10.3390/polym810035610.3390/polym8100356 ↗
14. 10.1002/prep.20180033510.1002/prep.201800335 ↗
15. 10.1016/j.jmrt.2020.05.08810.1016/j.jmrt.2020.05.088 ↗
16. Daniel BN. Reactive material enhanced projectiles and related methods. US 20080035007, 2008.
17. Yang SQ · J Natl Univ Def Technol · 2008 · 30 · 39
18. He B, Zhao W, Yang XJ Metal 3D printer and printing method based on interlayer impact strengthening process. 201410126522.6, 2014, 03, 31.