Hot Working behaviour of AI-AI 2 O 3 particulate reinforced metal matrix composite
Source abstract
Abstract
The hot deformation behaviour of a particulate reinforced metal matrix composite, manufactured via a casting route and consisting of a 2000 series matrix reinforced with 20 vol.-%Al 2 O 3 particles, was investigated over a range of temperatures and strain rates. The behaviour was compared with the unreinforced alloy deformed under the same conditions. Both materials exhibited similar hot working behaviour. However, under all deformation conditions the composite exhibited flow stresses higher than that of the alloy, but as the deformation temperature increased and the strain rate decreased, this difference became negligible. The activation energy for deformation was determined using constitutive equations. The value determined for the composite was slightly higher than that for the alloy. This suggested that the ceramic particles in the composite force the matrix to undergo additional strain hardening during deformation. Dynamic recovery was the sole restoration process in both materials. No evidence of dynamic recrystallisation was found.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials Science and Engineering, University of New South Wales, Kensington, NSW, Australia
References (27)
Show source-provided references
1. H. J. McQUEEN and J. J. JONAS: in ‘Treatise on materials science and technology plastic deformation of metals Vol. 6’ (ed. R. J. Arsenault) 393-493; 1975 New York Academic Press.10.1016/B978-0-12-341806-7.50014-3 ↗
2. D. ZHAO F. R. TULER and D. J. LLOYD: Ser. Metall. 1992 27 41–44.10.1016/0956-716X(92)90316-7 ↗
3. H. J. McQUEEN P. SAKARIS and J. BOWLES: in Proc. Conf. ‘Advanced composites ‘93’ (ed. T. Chandra and A. B. Dhingra) 1193-1198; 1993 Warrendale PA TMS.
4. X. XIA P. SAKARIS and H. J. McQUEEN: in Proc. 9th Int. Conf. on ‘Composite materials’ 157-162; 1993 Zaragoza Spain Woodhead Publishing.
5. B. V. RADHAKRISHNA BHAT Y. R. MAHAJAN H. Md. ROSHAN and Y. V. R. K. PRASAD: J. Mater. Sci. 1992 37 2141–2147.
6. B. V. RADHAKRISHNA BHAT Y. R. MAHAJAN H. Md. ROSHAN and Y. V. R. K. PRASAD: Metall. Trans. 1992 23A 2223–2230.10.1007/BF02646015 ↗
7. F. R. TULER J. T. BEALS C. DEMETRY D. ZHAO and D. J. LLOYD: in Proc. Conf. ‘Cast reinforced metal composites’ 321-326; 1988 Metals Park OH ASM.
8. E J. HUMPHREYS W. S. MILLER and M. R. DJAZEB: Mater. Sci. Technol. 1990 6 1157–1166.10.1179/026708390790189975 ↗
9. G. DURRANT and V. D. SCOTT: in Proc. 9th Int. Conf. on ‘Composite materials’ 747-754; 1993 Zaragoza Spain Woodhead Publishing.
10. A. RAZAGHIAN D. YU and T. CHANDRA: in Proc. Conf. ‘Advanced composites ‘93’ (ed. T. Chandra and A. B. Dhingra) 1067-1071; 1993 Warrendale PA TMS.
11. D. YU and T. CHANDRA: Mater. Sci. Forum 1993 113-115 563–568.10.4028/www.scientific.net/MSF.113-115.563 ↗
12. D. YU and T. CHANDRA: in Proc. Conf. ‘Advanced composites ‘93’ (ed. T. Chandra and A. B. Dhingra) 1073-1077; 1993 Warrendale PA TMS.
13. A. ALUNNI E. CERRI E. EVANGELISTA and A. FORCELLESE: in Proc. Conf. ‘Advanced composites ‘93’ (ed. T. Chandra and A. B. Dhingra) 1079-1085; 1993 Warrendale PA TMS.
14. P. TARRY W. LOUÉ and J. BOUVAIST: in Proc. 6th Conf. on ‘Composite materials’ 350-361; 1987 London Elsevier Applied Science.
15. J. SARKAR and M. K. SURAPPA: in Proc. Conf. ‘Advanced composites ‘93’ (ed. T. Chandra and A. B. Dhingra) 1051-1054; 1993 Warrendale PA TMS.
16. J. SARKAR V. PRASAD and M. K. SURAPPA: in Proc. 9th Int. Conf on ‘Composite materials’ 240-246; 1993 Zaragoza Spain Woodhead Publishing.
17. G. E. DIETER: in ‘Mechanical metallurgy’ 3 edn 306-307; 1986 New York McGraw-Hill.
18. C. M. SELLARS and W. G. TEGART: Mém. Sci. Rev. Métall. 1966 63 731–745.
19. M. FERRY: PhD thesis University of New South Wales 1994.
20. G. THOMAS and M. J. WHELAN: Philos. Mag. 1959 4 511–527.10.1080/14786435908233419 ↗
21. F. R. CASTRO-FERNANDEZ and C. M. SELLARS: Mater. Sci. Technol. 1988 4 621–627.10.1179/026708388790336163 ↗
22. M. FERRY and P. R. MLTNROE: Scr. Metall. Mater. 1994 31 143–148.10.1016/0956-716X(94)90165-1 ↗
23. R. J. ARSENAULT and N. SHI: Mater. Sci. Eng. 1986 81 175–187.10.1016/0025-5416(86)90261-2 ↗
24. B. VERLINDEN P. WOUTERS H. J. McQUEEN E. AERNOUDT L. DELAEY and S. CAUWENBERG: Mater. Sci. Eng. 1990 A123 229–237.10.1016/0921-5093(90)90288-E ↗
25. C. N. SPARKS and C. M. SELLARS: Mater. Sci. Forum 1993 113-115 557–562.10.4028/www.scientific.net/MSF.113-115.557 ↗
26. B. VERLINDEN P. WOUTERS H. J. McQUEEN E. AERNOUDT L. DELAEY and S. CAUWENBERG: Mater. Sci. Eng. 1990 A123 239–245.10.1016/0921-5093(90)90289-F ↗
27. T. CHRISTMAN and S. SURESH: Acta Metall. 1988 36 1691–1704.10.1016/0001-6160(88)90236-2 ↗