article·2012-01-01

Microstructure in interface zone of diffusion welded joint of Mo and Cu

Jian Zhang

Abstract

In this paper,Mo and Cu were welded together by diffusion welding with or without a Ni interlayer.SEM,EDS,EPMA,XRD were used to characterize the structure and the element distribution of the interface zone.The results showed that the Mo/Cu joint combined homogeneously by diffusion welding,the diffusion layer formed at the interface due to Mo atoms and Cu atoms inter-diffusion.There were some micro-voids on the copper side of the joint due to the role of kirkendall effect,and the voids reduced the performance of the joint.For the Mo/Ni/Cu joint,Mo/Ni and Ni/Cu interface were linked together,and the tensile strength of the Mo/Ni/Cu joint was higher than the Mo/Cu joint,because the added nickel eased the thermal stress of the joint.A solid solution was formed at the Mo/Ni interface where a joint brittle fracture took place.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.