article·2015-01-01

Electrochemical corrosion behavior of Monel alloy coating produced by supersonic arc spraying

Zha Bai-li

Abstract

The Monel K- 500 alloy coatings are sprayed by high velocity arc spraying with different spray parameters. The microstructure is investigated by SEM,chemical composition is measured by energy diffraction,and the phase composition is tested by XRD. There are little differences in microstructure among coatings.Particles deform fully in the coating,and the coating bonds well with the substrate except some pores in partial bonding area. The coatings are mainly composed of Ni-Cu infinite dissolved phase. The average bonding strength of the coatings increases with the increase of arc voltage,which reaches 23.25 MPa. Monel coating has good corrosion-resistance capability to mild salt fog which is better than pure aluminum coating. Energy dispersive X-ray spectroscopy and X-ray diffraction spectrum show that the corrosion products contain oxygen as the main element along with oxygen indicating that oxidation may have been taken place. The density of H+is directed proportion to corrosion rate,and the hydrogen over-potential decreased to- 400 m V in 5% HCl solution. In alkaline 5% Na OH solution,the Fe substrate was protected by the Monel alloy coatings,where,the Nickel phase in the coatings was corroded optimally when cathodically polarized at-300 m V after 4 hours.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · High-Temperature Coating Behaviors · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.