Shear fracture morphology of SiCp/Al composite resistance spot welding
Source abstract
Abstract
To optimize the resistance spot welding parameters of SiCp/Al composite,the composite was bonded by resistance spot welding(RSW)at different welding currents and welding times,and the shear strength test of the RSW joint was carried out.The morphologies of different RSW shear fractures were observed by SEM.The results show that when the welding current,welding time and the electrode pressure equals to 14.6 kA,0.2 s and 2 500 N respectively,the RSW joint has the highest strength and the value can reach 1 693 N.The morphologies of the two side of the joint shear fracture are round boss and circular hole respectively,which is typically a button fracture,and the RSW joint was well welded.The welding current and the welding time must match each other.When the matching value is lower than the optimum parameter,only a few points form metallurgical bonding on the RSW joint surface,which is a typical bonding surface fracture and the joint strength is relatively low.When the matching valve is higher than the optimum parameter,the RSW joint can be overheated easily,so that the RSW joint surface appears adhesion to low joint strength and the fracture has cracking,porosity and spatter defect.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.