Pulsed DE-MIG brazing-welding method of aluminum-galvanized steel dissimilar metals
Source abstract
Abstract
A new,high efficiency and low heat input method of Pulsed DE-MIG was put forward to control welding heat input precisely and growth of intermetallic compounds in interface of aluminum-steel. Pulsed DE-MIG process parameters were optimized by plate welding of aluminum alloy welding wire ER5356 welded on galvanized steel. The total current of welding wire remained constant,and Pulsed DE-MIG of aluminumgalvanized steel dissimilar metals was carried out at different Pulsed DE-MIG welding parameters. It indicated that the weld seam width decreased significantly but bead height increased obviously when bypass current increased gradually. OM,SEM and EDS were adopted to observe and characterize the interface microstructures of the joints. Two intermetallic compounds layers of Fe2Al5 and FeAl3formed along the interface. When the heat input of base metal was large,many FeAl3 precipicated,and when the heat input of base metal was decreased gradually,the amount of FeAl3 decreased until without FeAl3.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.