Effects of sol infiltration treatment on YSZ electrolyte coatings prepared by EB-PVD
Source abstract
Abstract
To explore the effects of sol infiltration treatment on YSZ electrolyte coatings prepared by electron beam physical vapor deposition(EB-PVD),8YSZ electrolyte coatings were prepared by EB-PVD at a deposition rate of 1 μm/min.Cross-sectional SEM analysis showed that the as-deposited coatings exhibited a loose columnar structure resulting in bad gas tightness.So a sol infiltration treatment was performed by immersing EB-PVD coatings in a zirconium and yttrium sol followed by a heat treatment.SEM analysis demonstrated that the sol could permeate the coatings with an impregnation depth of 3 μm.The intergranular pores and gaps of as-deposited coatings had been stuffed by decomposed products from sol.After infiltration treatment,the coefficient of gas permeability dropped from 6.78×10-5 cm4/(N·s)for as-deposited coating to 6.54×10-6 cm4/(N·s)for the coating after 8 times of infiltration treatment.However,the electrical conductivity of YSZ coating even after 8 times of sol infiltration treatment increased no more than 10% compared to that of as-deposited coating.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrophoretic Deposition in Materials Science · Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.