Effect of solution temperature on the microstructure of Inconel 625 alloy fabricated by PAW rapid prototyping
Source abstract
Abstract
Pulsed PAW rapid prototyping technology was used for fabricating Inconel625 alloy thin-wall component to optimize the microstructure and mechanical property.The effect of solution heat treatment temperature on the microstructure of Inconel625 alloy component was investigated by means of SEM and TEM.The results revealed that the as-deposited structure exhibited homogenous cellular dendrite structure,which grew epitaxially along the deposition direction.Moreover,some intermetallic phases including Laves phase and MC carbides were precipitated in the interdendritic region.Little changed during solution heat treatment at 720 ℃ for 1 h except the precipitation of hardening phase γ″(Ni3Nb),at 850 ℃,the dissolution of Laves phase and the precipitation of acicular δ phase were resulted in,and at 980 ℃,more Laves particles and δ phase were dissolved into γ matrix.However,at 1 080 ℃,Laves particles were dissolved into the matrix completely and the Nb segregation was relieved,and the mechanical properties decreased severely as a result of the grain growth coarsening.It was concluded that 980 ℃was the best temperature of solution heat treatment.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.