Weld cracking analysis of 12Cr1MoV header and branch pipe
Source abstract
Abstract
This paper is to investigate the causes of cracking in a header and branch pipe after 140 000 hours in service. The failed pipeline was examined by using macroscopic permeability,optical microscopy,scanning electron microscopy,energy dispersive spectroscopy and microhardness tests. It was found that many cracks were perpendicular to the welding line and it was believed that the welding defects accelerated the propagation of the cracks and changed the stress distribution status. It was also found that a number of inclusions distributed along a straight line,which made the material sensitive to directional stresses and resulted in the cracks. The fractured surface was mainly covered by oxides of Fe. The pipe was overheated for long time and the uneven oxidation layer was therefore formed on the outer surface so that stress concentration occurred and the crack was initiated on the outside surface. The hardness of the parent metal was higher than the expected value. To prevent the cracking occurring in such welded pipe,the welding process needs to be optimized and few factors need to be taken into account,such as preheating before welding and tempering after welding,eliminating the oxide layer of outside the pipe wall and reducing the frequency of downtime.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.