article·2015-01-01

Study on the law of isothermal foaming of Ti-6Al-4V foams fabricated by gas entrapment

Wang Zhe-le

Abstract

In order to determine the density of porosity and characterize the microstructure of pores in Ti-6Al-4V foams fabricated by gas entrapment method, different combination of isothermal foaming temperature and time of the process were studied. The density of porosity in Ti-6Al-4V foams was calculated through Archimedes method. The microscopic characteristics of the interior of Ti-6Al-4V foams were observed by using optical microscopy( OM) and scanning electron microscopy( SEM). The results showed that the density of porosity and pore size increased with isothermal foaming temperature. But the porosity and pore size decreased and the pore morphology changed from spherical to a polygon shape,when the isothermal foaming temperature was above 950 ℃. This is believed to be attributed to the generation of large sized βphase. By adding isothermal foaming time,the population of porosity and spherical pores in Ti-6Al-4V foams can be increased in the same time. Ti-6Al-4V foams containing up to porosity of 34. 2% in the average pore size of 156 μm were successfully produced by gas entrapment at 950 ℃ isothermal foaming for 10 hours,while the pore morphology is sphere and pore is dispersed evenly.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Lubrication Engineering · Cellular and Composite Structures · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.