Structure and properties of laser remelted ceramic coatings on Zn-Al alloy
Source abstract
Abstract
The wear resistance,Vickers hardness and structure of Al_2O_3 ceramic coatings on Zn-Al based alloy were studied by optical microscopy,transmission electronic microscopy,X-ray diffraction,micro hardmeter and micro driving abrading machine.The results show that the plasma sprayed coatings consists of α-Al_2O_3 and γ-Al_2O_3.There is a mechanically combined interface between Al_2O_3 coatings and substrate.The Al_2O_3 ceramic phase in the coatings cladded by laser is body-centered tetragonal δ-Al_2O_3,of which lattice parameters are: a_0=7.943×10~(-8)cm,c_0=23.500×10~(-8)cm.An interfacial phase of metallurgical combination and a little composition gradient are observed between Al_2O_3and substrate.The hardness of Al_2O_3 coatings cladded by laser is about 150~170 HV_(100g) and the wear resistance(S=1.988) is greatly improved compared with that of Zn-Al based alloy substrate(S=2.837).In addition,the wear mechanism is fatigue wear and abrasive wear,but mainly is abrasive wear.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Metal and Thin Film Mechanics · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.