article·2006-01-01

Research substrates of CVD diamond for high frequency surface acoustic wave device

Liu Jian-min, Yiben Xia

Abstract

With the polishing sides of silicon substrates being scratched by 100 nm powder of diamond,freestanding diamond films were prepared by hot filament chemical vapor deposition(HFCVD) using acetone carried by hydrogen at the nucleation condition of low pressure.After ZnO thin films were grown on nucleation sides of freestanding diamond by RF reactive magnetron sputtering,the structure of ZnO/freestanding diamond film was formed.The surface morphologies of the nucleation sides were characterized by optical microscope,scanning electron microscopy(SEM),and atom force microscope(AFM).The results indicate low pressure during nucleation helps to increase nucleation density,and surface roughness of nucleation sides is about 1.5 nm.Raman spectrum shows a sharp peak at 1334 cm~(-1),which is associated with sp3 bond of diamonds.The amount of graphite in the nucleation sides is small,and the nucleation sides are in compressive stress.X-ray diffraction(XRD) pattern of the structure of ZnO/freestanding diamond shows a sharp diffraction peak for ZnO(002),which indicates that as-sputtered film is highly c-axis oriented.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Adhesion, Friction, and Surface Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.