An experimental study on strain rate-dependent tensile properties of alumiunium L2
Source abstract
Abstract
Tensile experiments of aluminium L2 under different strain-rates (0. 001 s-1,0.02s-1、200 s-1, 500 s-1and 1 300 s-1) were carried out and the complete stress strain curves were obtained. The results show that the yield strength σs, the ultimate strength σb and the failure strain eb vary slightly under low strain-rates (e 0.02 s-1),σb and σs increase with the strain-rate but eb decreases with the strain - rate under high strain-rates(e 200 s-1) and the modulus E is insensitive to strain-rate. The strain-rate sensitivity is assumed to be consistent with the modified power-law of strain-rate hardening law and its simplified model, the Ramberg-Osgood model is adopted to simulate the stress-strain curves of L2 under different strain-rates. The simulated curves show good agreement with the experiment results.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Electromagnetic Launch and Propulsion Technology · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.