Aging behavior and microstructure of AlNp/2024 aluminum matrix composites
Source abstract
Abstract
Two 2024 aluminum alloy matrix composites reinforced by AlN particles with 50% volume fraction and different grain sizes (0.5 μm and 10 μm) were fabricated by squeeze casting method. The aging behavior and microstructure of AlNp/2024Al composites were investigated by means of hardness test and transmission electron microscopy (TEM). The results showed that the precipitation sequence of AlNp/2024Al composites was similar to that of the matrix alloy aged at 160 ℃ and 190 ℃, but the age hardening rate of composites was improved, and the AlN particles with large sizes promoted the precipitation process more obviously, in comparison with small size AlN particles. A great number of dislocations were observed in the matrix phase showing a much higher density in the composites than that in 2024Al alloy. The larger the reinforcement particles, the larger the dislocation density in the composites. The acceleration of age hardening rate in the composites is attributed to the interfaces between particles and the matrix and the high density of dislocations introduced by the addition of AlN particles.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.