Performance of PTFE/SiO_2 hybrid materials
Source abstract
Abstract
Based on the hard dispersion of nanoparticles in PTFE(polytetrafluoroethylene) resin,PTFE/SiO2 hybrids were prepared by PTFE emulsion in-site Sol-Gel process,and the performance of hybrids was described.When the content of SiO2 was 1.05 %(marked as FS-2),the tensile strength reached a maximum 20.96 MPa,which was twice as much as that of the blank PTFE.With the improvement of SiO2 content,the elongation at break were reduced,the hardness increased gradually,and the contact angle decreased from 121° to 79°.The SEM images showed that the diameter of SiO2 in FS-2 was 100 nm,and became larger as the increasing of SiO2 content.The heat resistance of hybrids were enhanced when SiO2 content reached 5.00%,and its decomposition temperature was 528 ℃,while that of blank PTFE was 503 ℃.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Silicone and Siloxane Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.