Fatigue behavior of over-aged 2A12 alloys in a vacuum environment
Source abstract
Abstract
The fatigue behavior of over-aged 2A12 alloys is studied by using a tensile-compression fatigue testing machine.The effect of vacuum on the fatigue mode is analyzed by means of a Scanning Electron Microscope(SEM).The results of the analysis indicate that the vacuum environment has made the S-N curve shift to the upper right side resulting in a marked enhancement of fatigue life.Under low cyclic stresses,the fatigue cycles to failure in a vacuum environment increased approximately three times as compared with those at room temperature.The fractures in both the air and vacuum environment assume a transgranular shape.In the fractures fatigue striations,steps and dimples and greater frequency of fatigue striations were observed under low cyclic stresses.However,in vacuum conditions,the height of the steps in the fatigue fractures is relatively small,and the fatigue striations and dimples are comparatively thin and slender.Finally discussed were the causes leading to the impact of vacuum on the fatigue behavior of over-aged 2A12 alloys.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.