article·2005-01-01

Formability and nonaxisymmetric changes for the hole flanging process with titanium alloy sheet

Zhang Fengyang

Abstract

To determine the hole flanging formability and reveal the effect of anisotropy on shape and size precision , a series of hole flanging experiments were executed at room temperature and 600℃, respectively, with circular plates of TC1M titanium alloy sheets. Specimens with thickness of 1. 5 mm were used throughout. The results show that, compared with the cold forming process, hot flanging at high temperatures can make the limitation of formability higher. Moreover, there is a necking mode between the perfect and fracture state; however, during the cold forming process, cracks exhibit directly if the pre-determined hole exceeds the diameter limit. The distinctly wavy height and ununiformly distributed thickness along the lip of the flanged hole occurred irrespective of hot or cold flanging and the cracks were situated at the highest points perpendicular to the rolling direction along the lip edge. The conclusion can be drawn that the more the flanging deformation, the more the nonaxisymmetric changes.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Laser and Thermal Forming Techniques · Advanced Surface Polishing Techniques · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.