article·2011-01-01

Stretching simulation and experiment of aluminum alloy sheet with clamping

Zhong Yu

Abstract

To optimize the parameters during stretching process of pre-stretched aluminum alloy sheet,thermo-mechanical coupled simulation of 7075 aluminum alloy sheet in quenching process is carried out.Based on the distribution principle of residual stress,stretching process of aluminum alloy sheet with clamping is simulated to study the relieving results of residual stress in different stretch rates.The simulation results show that three deformation areas,clamping area,transition area and uniform area,appear on the samples.Blind hole method is adopted to verify the experimental results,which are in accordance with simulation results.The test results show that,for the 7075 aluminum alloy sheet with thickness of 12 mm,the optimum stretch rate is 1%;transition area along length direction is 8 mm which is 67% of the thickness of plate,while the sawing amount is the sum of transition area and clamping area.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.