article·2010-01-01

Control of the surface quality for ZrO_2 microstructures by powder micro-injection molding

Wang Zhenlong

Abstract

A ZrO2 ceramic microstructured part with the minimum size of Φ300 μm × 250 μm was fabricated by powder micro-injection molding process. The effects of injection parameters,mold vacuum and silicon mold on the surface quality of microstructures were analyzed. Test results indicate that the tip of microstructures becomes more uneven with the decrease of micro-cavity size under the same injection parameters. The difference of surface quality among microstructures with different sizes can be eliminated by increasing injection pressure and mold temperature or vacuumizing mold before the injection stage. On the other hand,mold vacuum can avoid air holes on the surface of microstructures. Sub-micron ZrO2 powder improves the surface roughness of sintered ceramic microstructures from 0. 33 μm of the green part to 0. 28 μm.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Injection Molding Process and Properties · Additive Manufacturing and 3D Printing Technologies · Polymer Foaming and Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.