article·2009-01-01

Experimental study on the axial compressive strength of the primary-load bearing wound cylinders

Zeng Jingcheng

Abstract

Wound cylinders have already been applied to primary-load bearing composite structures in aerospace.In order to further improve the axial compressive strength(ACS) of these wound cylinders,a series of factors that influence the ACS of cylinders had been investigated by experimental study.The approaches contributed to the ACS of wound cylinders were systematically discussed.Results show that not only the winding angles have evident influences on the ACS which were discussed in many literatures,the hoop winding ply content and the end edge effects also have great influents on the ACS which were investigated scarcely.The obtained ACS Can be increased farthest by 77% when 20% angle winding plies are replaced by hoop winding plies.The ACS also increased by more than 30% when the compressed end of cylinders is strengthened by hoop winding layers.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Mechanical Failure Analysis and Simulation · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.