article·2013-01-01

Influence of oxygen content on microstrcture and performance of high velocity oxygen fuel sprayed TiB_2-40Co coatings

Xia Chen

Abstract

Three kinds of TiB240Co coatings were fabricated by high velocity oxygen fuel(HVOF) method under different oxygen flow rate.The microstructure and phase structure were analyzed by scanning electron microscope(SEM) and Xray diffraction(XRD).The microhardness was measured by indentation method and the properties of thermal shock resistance and corrosion resistance to molten Al12.07% Si alloy were investigated.The results show that three kinds of coatings have layer structure,the No.1 coating has much denser microstructure and the lowest porosity(0.286%),the main phase constitution of the coatings are TiB2 and Co.The microhardness of the studied coatings is respectively 697±60 HV 0.3 、523±86 HV 0.3 and 648±38 HV 0.3.The No.1 coating has excellent thermal shock resistance performance.And the coatings have good durability in the molten Al-12.07% Si alloy after 120h immersion test,especially No.1 coating has better corrosion resistance performance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.