article·2007-01-01

Study on microarc oxidation processes for Mg alloy

Su Yuchang

Abstract

In order to optimize the production regime for microarc oxidation coating of required thickness on Mg alloy,the orthogonal design was made to select best microarc oxidation process parameters.The thickness and microhardness of each tested microarc oxidation coatings were examined to evaluate the influence of each factor by synthetical equity.Results of XRD,SEM and EDS showed that Mg alloy were coated with a uniform,thickness over 30 μm and silver-gray ceramic coating which was composed of MgAl2O4 and little MgO and Al2O3 from a solution with 100 g/L NaOH,40 g/L aluminate,at 35 voltage and at 35 ℃ after 60 minutes micarc oxidation.The coating could be separated to a compact layer and a loose layer.The results of hardness and corrosion test also indicated the ceramic coating had higher hardness and better corrosion resistance than Mg alloy substrate.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.