article·2011-01-01

Influence of QPQ salt bath composite processing on microstructure and property of 3Cr2W8V steel

Shu‐Yuan Chen

Abstract

QPQ salt bath composite process,which is a new modification technology of surface hardening of metal salt bath,was used to 3Cr2W8V steel,and with the help of OM,SEM,microhardness tester,X-ray diffraction,high-temperature friction and wear tester and electrochemical workstation,the microstructure,chemical composition,microhardness,phase,wear resistance and corrosion resistance of QPQ layer were analyzed.The results show that QPQ surface layer is flat,and when the salt bath nitrocarburizing time is certain,with the increasing of the nitrocarburizing salt bath temperature,the first appeared phase is Fe3N,followed by the emergence of Fe4N and Fe3O4 phases,and finally there is Fe2N phase.The surface microhardness of specimens treated by QPQ is 600~1400 HV0.1,and the matrix hardness is 520 HV0.1.The smallest wear loss of samples by QPQ treatment is half of that of matrix and the friction coefficient is the minimum,when the nitrocarburizing temperature is 580 ℃,and the nitrocarburizing time is 1 h.In the certain oxidation temperature of molten salt bath,the corrosion potential and the corrosion resistance increase gradually with the extended oxidation time.When the molten salt oxidation temperature is set to 380 ℃ and the oxidation time is 120 minutes,the corrosion potential of QPQ treated sample is the highest,and the corrosion resistance is the best.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Aluminum Alloys Composites Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.