Effects of rapid heating tempering temperature on precipitation behavior, microstructure and micro-hardness of vanadium-bearing ULCB steel
Source abstract
Abstract
The effects of different tempering temperatures under rapid heating on precipitation behavior,microstructure and micro-hardness of vanadium-bearing ULCB steel were investigated by using thermal simulation,scanning electron microscope(SEM) and transmission electron microscope(TEM).The results show that the main microstructures of tested steel are lath bainite and granular bainite before tempering,and polygonal ferrite appears after high temperature tempering.The amount of the lath bainite decreases and polygonal ferrite increases as tempering temperature increasing.The second phase particles mainly precipitate at dislocations when the tempering temperature is below 600 ℃,and above 600 ℃,they are precipitating along the grain boundaries and at dislocations.With the increase of tempering temperature,the amount of precipitation increases and the particles size does not show a clear change.This is because the higher heating rate and shorter holding time is unfavorable to the recovery of high density dislocations and diffusion of carbon and vanadium elements.There are two kinds of different sizes of the nanometer-sized precipitate particles in matrix,one is vanadium carbonitride,of which the size is from 15 nm to 20 nm,another is enriched with Cr and V and it is smaller than 10 nm.It seems that this carbide can maintain the face-centered cubic structure.After tempering at 600 ℃,the micro-hardness of tested steel is the highest,which is about 332 HV.The micro-hardness variation is ascribed to the comprehensive mechanism including lower bainite coarsening,the recovery softening process of dislocation substructure and precipitation strengthening of the second phase in bainite during tempering.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.