Technical conditions of Ni-P-(Ni/SiC)_P coatings
Source abstract
Abstract
In order to solve the problems such as the poor compatibility between the Ni-P-(SiC) P coating matrix metal bond and strengthening of the covalent bond,easy shedding of the enhanced particle and the deduction of the coating properties(SiC)P was surface-modified to(Ni/SiC)P by a simple electroless plating.Then(Ni/SiC)P particles were incorporated into the Ni-P plating solution to prepare Ni-P-(Ni/SiC)P electroless composite coatings.The experimental results show that: temperature,pH,stirring speed and adding amount of(Ni/SiC)P have great influence on the deposition amount and deposition rate of Ni-P-(Ni/SiC)P coating.The optimal experimental conditions are the temperature of 82~86 ℃,the pH range of 4.2~4.6,the stirring rate of 200 r/mim and the amount of particles of 10 g/L.SEM and EDS analyses show that Ni-P-(Ni/SiC)P coating is uniform and dense,the deposition of Ni,P and Si is large.Comparisons of the Ni-P coatings and the Ni-P-(SiC)Pcoatings by wear resistance experiment show that the Ni-P-(Ni/SiC)P coatings have good wear resisting properties.The(Ni/SiC)P achieved by surface modification can further improve the using performance of Ni-P-(SiC)p coatings.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Silicon Carbide Semiconductor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.