Effect of large heat input on microstructure and properties of welds in E40 steel
Source abstract
Abstract
A newly developed high strength low alloy welding wire G55 for High Heat Input Welding was studied.E40 steel was welded with heat input of 60、122、158 kJ/cm by Dual Wire Arc Welding using welding wire G55.Mechanical properties were analyzed and microstructures were observed by OM(Optical Microscopy),SEM(Scanning Electron Microscopy) and TEM(Transmission Electron Microscopy).The results indicated that the microstructures of welds at different heat inputs welding were main AF(Acicular Ferrite).With heat inputs increasing,the impact toughness of welds increased due to the increasing of width of columnar grains and percentage of acicular ferrite;the reducing of oxygen content of welds and number of inclusions;and the reducing of thermal cycling and weak zone of welds with massive ferrite.The strength of welds increased mainly because of the increasing of acicular ferrite.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.