Pretreatment process on Ce-Mn ponversion poating of aluminium alloy
Source abstract
Abstract
Eight kind pretreatment progresses were proposed as pretreatment of 6063 die-cast aluminium alloy,surface morphologies of untreated or treated were observed by optical microscope.The polarization curves and electrochemical impedance spectroscopy for the conversion coatings obtained after different pretreatments were measured in a 3.5%(mass fraction) NaCl solution.A optimal pretreatment progress was obtained as following:polishing from 180# to 1000# by grit emery papers →alkaline cleaning with 100g/LNaOH+40g/LNa3PO4+15 g/LNa2SiO3 for 2 min at 60oC→acid cleaning with 20%HNO3 + 10%H3PO4 + 5%HF for 1 min at room temperature→surface activation with 10g/LNaOH for 30 second→washed three time with distilled water and dries.The morphology of the surface of Al alloy obtained after pretreatment,uncoated or coated in Ce(NO3)3 and KMnO4 chemical conversion solution were studied by scanning electron microscopy(SEM) and elemental composition of Ce-Mn conversion coating were studied by energy-dispersive spectroscopy(EDS),respectively.The results showed that the clean surface and well-distributed cathodic points is a necessary step for producing Ce-Mn conversion coating on the surface of Al alloy in following immersion in Ce(NO3)3 and KMnO4 bath.Otherwise,a complete and optimal corrosion resistance conversion coating could not be formed after pretreatment.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.