article·2014-01-01

Effect of substrates on microstructures and mechanical properties of bulk nanocrystalline Fe_3Al-based alloy with different alloying elements

LA Pei-qin

Abstract

Bulk nanocrystalline Fe3Al, Fe3Al-10Mn and Fe3Al-10Cr alloys were prepared on different substrates including glass and copper by aluminothermic reaction. The effects of substrates and alloying elements on the microstructures and mechanical properties of the resulting samples were investigated. The results show that the ordered DO3structure exists in Fe3Al-10Mn alloy prepared on glass substrate,while other alloys are disordered bcc structures. The average grain size of alloys prepared on the glass substrate is 27,19 and 23 nm,repectively. For alloys prepared on the copper substrate,the grain size is 18,15 and 22 nm. The yield strength and hardness of Fe3Al and Fe3Al-10Mn alloys prepared on the glass substrate decrease slightly compared with those on the copper substrate,while Fe3Al alloy have the better plasticity. The Vickers hardness and yield strength of Fe3Al-10Cr alloy prepared on the glass substrate was increased by 42. 4% to 292 HV30and 20% to 960 MPa,repectively. The alloying elements have little influence on the plasticity but a significant improvement on the yield strength of alloys.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Materials Characterization Techniques · Microstructure and mechanical properties · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.