Frication properties study on plasma surface alloying Mo-Cr low-alloy HSS
Source abstract
Abstract
This article is to discuss wear properties of the Mo-Cr low-alloy high speed steel(HSS).Mo-Cr penetrating layer on Q235 steels are built up by double glow plasma surface metallurgy and then ultra-saturated carbonization,quenching and low tempering were made.Results indicated that,the depth of coating is over 100 μm,and the contents of Mo、Cr in the surface alloying are 20% and 10%.Then ultra-saturated carbonization alloyed component is similar to molybdenum HSS with surface carburizing 2.0% above.After quenching and low tempering,it was found that the hardness of surface alloying is up to 1300HV.The hardness value is higher than that of metallurgy HSS.The abrasion experimental results showed that the sliding friction coefficient of the sample is increased with the stress and the average wearability is 2.2 times in comparison with GCr15 carburized and quenched.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Metal and Thin Film Mechanics · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.