Microstructure characteristics of microwave sintered Mn-Zn ferrite soft magnetic materials
Source abstract
Abstract
The Mn- Zn ferrite were prepared by microwave with frequency of 2. 45 GHz sintering at 1 200 ~ 1 400 ℃. Two precursor powders,one was synthesized by conventional mixed oxide method and another was provided by market,were compacted and sintered. Microstructure evolution of the sintered ferrite samples was carried out using X-ray diffraction( XRD),scanning electron microscope( SEM). The sample densification properties during sintering and the effect of microwave heating temperature on the sample density were studied, and the results showed that the sample with density range of 4. 80 ~ 5. 28 g / cm3,has a typical spinel structure, and the main phase is Mn0. 4Zn0. 6Fe2O4. The microwave sintering temperature has greater impact on the density, and with the sintering temperature increasing,the density increases. A good crystallizing and homogeneous with straight grain boundaries in samples,can be observed by SEM at 1 350 ~ 1 400 ℃. Microwave sintering can achieve rapid densification of samples.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnetic Properties and Synthesis of Ferrites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.