article·2012-01-01

Electroless copper plating on PCB using sodium hypophosphite as reducing agent

Faxin Xiao

Abstract

The influences of additives(nickel sulfate,L–arginine,α–α'–dipyridyl and maleic acid)on sodium hypophosphite electroless copper plating were investigated using SEM,XRD and electrochemical tests to solve the problem of pollution and low stability of formaldehyde electroless copper plating.The results show that the plating rate and coating quality are increased by proper amount of nickel sulfate and maleic acid,and the appropriate dosage are 0.8 g·L-1 and 10 mg·L-1,respectively,the coating quality is greatly improved by proper amount of α–α'–dipyridyl and the proper amount is 10 mg·L-1.The stability of sodium hypophosphite bath is excellent,and the stability time of bath with the addition of mixed additives reaches the highest of 48 h at 80 ℃.The cathode peak current density is also increased after mixed additives are added.The plating rate is 5.10 μm·h-1 and the coating is uniform and compact under optimal conditions,the backlight level achieves 10 grade after plating for 20 min.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.