Research on continuous extrusion molding of large-sized MoSi_2 bars
Source abstract
Abstract
The lifetime of MoSi2 heating element,manufactured by continuous extrusion molding technology,can be extended via using defects free hot and cold ends.For preparing defects free MoSi2 rods,the influence of binder viscosity and degreasing condition on the microstructure and mechanical properties of the rods was investigated in this work.Experimental results indicate that the high incidence rates of interior and surface defects are generally resulted from high binder viscosity,which cannot be eliminated by changing the degreasing condition only.Using binder with low viscosity,the occurrence of interior defects can be controlled but that of surface defects is closely influenced by the degreasing condition.Therefore,defects free rods can be prepared by adopting binder with moderate viscosity and processing in suitable degreasing condition.Based on the experimental data,the optimal technical parameters were established,which improved the rate of finished products from 80% to 96%.This technology can also supply reference to the continuous extrusion molding of other ceramic bars.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Injection Molding Process and Properties · Additive Manufacturing and 3D Printing Technologies · Manufacturing Process and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.