article·2012-01-01

The influences of different corrosion inhibitors on weld performance of SnAgCu solder paste

Yunzhu Ma

Abstract

The influences of adding imidazole medicament corrosion inhibitor A or KuiLin kind corrosion inhibitor B or their compound into flux on welding performance of SnAgCu solder paste were studied by analyzing SnAgCu solder paste,interfacial IMC(intermetallic compound) of Cu welding interface and mechanical properties.Scanning Electricity Microscope(SEM) and Energy Dispersive Spectrometer(EDS) were used to observe and analyze the IMC layer microstructure and the composition of solder joint.Mechanical Testing Machine was used to test the shear strength and tensile strength of solder joint,and the shear fractography was measured by SEM.The results indicate that the corrosion inhibitor controls the growth of IMC layer.The average thickness of IMC layer is 7.6 μm without corrosion inhibitor addition,the IMC layer is uneven and with some column structure.The IMC layer,by adding 0.5wt%A and 0.5wt%B,is 3.4 μm thickness,very density and uniformity,and at the same time,the greatest shear strength,47.92 MPa,and tensile strength,99.28 MPa are obtained.The shear fracture mode is gliding fracture,and the tensile fracture mode is brittle fracture.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.