Nanoindentation of microarc oxidation coatings on pure titanium
Source abstract
Abstract
Microarc oxidation is a unconventional plasmachemical-electroch em ical method of forming ceramic coatings on valve metals.Hardness and elastic mo dulus are two important mechanical properties of the coatings.In present wor k,a ceramic oxide coating was prepared on TA2pure titanium by alternating-cur rent microarc oxidation(MAO)in aluminate solution.Distributions of microhard ness H and elastic modulus E in the MAO ceramic coating were determined by nanoi ndentation.The effects of microarc discharge on struc-ture and properties of c oatings were discussed.The hardness and elastic modulus profiles in the MAO coa t-ing are similar.From the coating surface to the interior of the coating,the H and E gradually increase.The H and E can reach maximum values of9.78GPa and176GPa respectively in the coating near the inter-face,which are much hi gher than that of titanium substrate.The changes of relative contents of TiO 2 rutile and TiAl 2 O 5 along the coating thickness determine the H and E profiles in the coating.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · High-Temperature Coating Behaviors · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.