article·2014-01-01

Aging precipitation behavior of modified high manganese steel and its influences on mechanical properties

Lian Li

Abstract

This study aims at combining modification with dispersion treatment to improve the properties of high manganese steel. The aging microstructures of modified high-manganese steel were studied by means of metallographic analysis,SEM,XRD and TEM. Results show that after aging at 460 ℃ for 1 h,the globular separation phases grows in the matrix,spherical precipitates transform into needle over time. When aging at 520 ℃for 1 h,a small amount of spherical phases precipitate on the grain boundary,fine needle-like phases precipitate in the grain. After aging at 580 ℃ for 1 h,the coarse needle-like phases precipitate in the matrix,and pearlitic transformation occurs. With the aging temperature increases,spherical precipitates transform into needle,crystal structure of globular phase and needle-like one are different,and compared with globular phases,the needle-like precipitated phases are more stable. The hardness of modified high manganese steel increases with the increasing of precipitated phases. The key factor on impact toughness and abrasive resistance is fine needle-like precipitated phases( Mn,Fe)7C3. The best aging process should make wear-resisting precipitated phase precipitate and does not cause the increase of micro strain. The best aging parameter of this experimental steel is aging at 520 ℃ for 1 h.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Non-Destructive Testing Techniques · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.