article·2011-01-01

Hot ductility of austenitic stainless steels Cr15Mn9Cu2Ni1N in slab shell

Wei Peng

Abstract

To understand the hot ductility of austenitic stainless steel Cr15Mn9Cu2Ni1N slab,small tensile specimens were cut from the slab core and shell,and high temperature tensile tests were carried out on THERMORESTOR-W machine.Results show that,when deformation temperature is higher than 1050 ℃,the reduction of area(RA) of specimens from shell surface is low,and gradually increases from surface to inside;when deformation temperature is lower than 1050 ℃,the RA doesn't change apparently.According to the microstructures of the slab,it is found that the cooling rate of shell surface during solidification is so high that δ-ferrite don't solidify as primary phase entirely in liquid phase and then transform austenite,instead,the austenite is solidified directly from retained liquid phase between dendrites.This change of solidification mode is very obvious in the shell surface,which decreases its hot ductility.Owing to coarse equiaxed structures in core,the hot ductility is lower than that in shell.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Laser and Thermal Forming Techniques · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.