Effect of participation on microstructures,mechanical properties and texture of deep drawing DP steel
Source abstract
Abstract
To investigate the effect of participation on texture of deep drawing DP steel,the equilibrium precipitates of DP steel was calculated using Thermo-calc thermodynamic software,and the microstructures,mechanical properties and texture evolution of DP steels with different composition were investigated by SEM,TEM and XRD techniques. The results show that the main precipitates of tested steels are MC_SHP,M7C3,MnS and AlN. Comparing to the steel with low Mo content,the austenite region is narrowed,and the participation temperature of MoC is higher. A large amount of MoC participation is observed in ferrite matrix.After annealing at 860 ℃,a homogeneous,dispersed distribution of 3% martensite was transformed in the steel with high Mo content,which makes the tensile strength up to 445 MPa,and the r value is 1. 5.However,the bainite transformation happens in the steel with low Mo content,which makes the mechanical properties strongly reduced. The texture in hot-rolled strip of the two steels is slightly weak,and the {223} 110 component is stability increasing during cold rolling. The high intensity of γ fiber texture is formed during annealing process,and the lower r value may be contributed to the {001} 110 orientation in the steel with low Mo content.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.