Sintering technology of PMSZT piezoelectric ceramics
Source abstract
Abstract
High-power piezoelectric ceramics are desirable to combine a high mechanical quality factor(Qm) with a high piezoelectric constant(d 33) and a high planar coupling factor(Kp).However,when Qm is increased,Kp and d33 will be decreased.So,it is essential to have a material that gives a high Qm and at the same time Kp and d33 are well situated.Microstructure affects the properties of ceramics materials greatly,which can be enhanced by choosing right sintering rules to change the microstructure.The effects of heating rate and soaking time on crystallographic phase,microstructure,electric-properties of PMSZT high-power piezoelectric ceramics have been studied.The results show that densification decrease when heating rate is too low or too fast.At 1240℃,grains grow up homogeneously and the minimum value of Curie temperature is obtained with 1h soaking time.With soaking time prolonging or shortening,the Curie temperature moves to high temperature.A well-situated property of eT33/e0(1700),d33(336pC/N),Kp(0.62),Qm(2200),tanδ(0.0030) have been obtained when soaking time is 1h.PMSZT ceramics exhibite a wellsituated property,which can satisfy the desire of high-power piezoelectric ceramics.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Acoustic Wave Resonator Technologies · Engineering Applied Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.