article·2005-01-01

Study on bond interface between ternary boride cermet cladding and steel substrate

Futian Liu, Huang Wei-ling

Abstract

In order to increase the wear resistance and corrosion resistance of steel materials,using Mo,B-Fe alloy and Fe powders as raw materials,ternary boride hard alloy clad material was prepared by in situ reaction and liquid phase sintering in vacuum furnace on steel(Q235) substrate.The bond strength between the cladding and the steel substrate of clad material are measured using three-point bending method,and the measured value is 740.38 MPa.The measured results indicate that a strong bond interface exists between the cladding and the steel substrate.Fracture does not occur at the bond interface,but initiates in the interior of the steel substrate or the cladding in the vicinity of the interface.The micro-hardness,microstructure and element distribution in the vicinity of the bond interface are investigated.It is shown that the cermet cladding has high microhardness.In the vicinity of the bonding interface,there exists a narrow transitional zone,in which the distribution of elements Mo and Fe continuously changes.No clear bonding interface exists between cladding and steel substrate,but a transitional layer with a certain thickness is formed,and become a firm metallurgical bond between cladding and steel substrate.The formation mechanism of the interface between the cladding and the steel is investigated.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.